- High Power Density: 850 watt in 1U high, half rack wide
- Constant current CC and constant voltage CV modes
- USB, RS-232, RS-485 as a standard
- LXI Compliant Ethernet LAN communication option
- IEEE-488.2 GPIB option
- Standard analog programming 0-5V, 0-10V, or 0-5kΩ.
- Can be connected in series or parallel
- Front panel controls
- 5 year warranty
The Sorensen XG Series is an 850 Watt, 1U half-rack DC power supply. The XG Series comes standard with USB 2.0, RS-232, RS-485, isolated and non-isolated analog interfaces to provide a comprehensive set of options to connect to a PC or other network device. XG Series power supplies can be connected in parallel or series to produce greater current or voltage output for your applications.
View product on Ametek Programmable Power website
Ametek Programmable Power Catalogue
We offer you advice that is gained from many years of assisting people from all industries with their individual requirements, technical objectives and challenges.
largest range in australia
With the largest range of programmable power solutions in Australia, we can assist you with a solution to virtually all applications.
most advanced solutions
The Ametek stable of brands the are industry's greatest innovators, always being the first to release new technologies & features.
VIC - HEAD OFFICE / WAREHOUSE
27 Viking Court
Cheltenham VIC 3192
NSW - SALES OFFICE / WAREHOUSE
29/8-10 Barry Road
Chipping Norton NSW 2170
QLD - SALES OFFICE
1 / 26 Duke Street
Sunshine Beach QLD 4567
WA - SALES OFFICE
67 Howe Street
Osborne Park WA 6017
We'd love to hear from you! At Fuseco, rather than publish generic prices, we prefer to give you an individual quote. This ensures that we provide you with the best possible pricing to meet your needs.
The quickest way to place an order is to give our customer service team a call or send us an email. We promise to respond within 4 hours or you get $100 off your next order, however we usually respond within 1-2 hours to email enquiries. So go ahead and speak to us, we'd love to help you with your needs.
- For all orders over $100 (excl. GST & freight), freight is FIS (Free into Store).
- For all orders under $100 (excl. GST & freight), a freight charge of $25 + GST is applicable.
- Additional fees may apply for deliveries to the Northern Territory and remote areas.
All Other Products
- Freight charges POA (Price on Application)
- FOT (Customer nominates own carrier and accepts all charges)
When purchasing a power supply, the first choice to be made is linear supply or switching supply. Linear power supplies offer low ripple and noise specifications and have fast transient behavior. However they are inefficient and generate a lot of heat. They are also quite heavy. As a result most engineers prefer linear power supplies for low power applications. Using switching power supplies is a better choice for higher output power or multichannel applications. They provide higher power density. Switching power supplies are easier to control than linear supplies and cost about the same per channel.
DC output voltage slew rate is a rise or fall time. DC programmable power supplies have output filters that use large capacitors that store a lot of energy. It’s mainly the charge and discharge time of this filter, combined with the current demand of the DUT, which determine a supply’s voltage slew rate. The voltage slew rate is mostly independent of the connected EUT.
Stability is a measure of a supply’s long term output voltage or current drift. Stability is primarily specified in parts per million or ppm.
If more output current is required then paralleling power supply outputs is generally the solution. Ametek Programmable Power uses a dedicated control bus to connect its power supplies in parallel. The system configures itself automatically, identifying which unit is the master and which units are the slaves.
If more output voltage is required then connecting power supplies outputs in series is generally the solution. All you have to do is to connect the positive terminal of one supply to the negative of another. The limitation is that when operated in series, there are no master and slave units. Individual power supplies has to be programmed.
Upgrading to the Asterion power supply system has given us significant more testing capability and flexibility. It has been a wise investment. Thank you for your advice and support.
TEST LABORATORY SENIOR ANALYST AT UNIVERSITY OF NSW
Buying the MX45 California Instruments power source has given us enhanced testing capabilities. We have the SNK option, which is a bidirectional sink option. We are now able to simulate all grid conditions in our lab environment up to 45kVA. For me, reliability is important and I’m happy to say that we have been using this device for many years without any issues.
RESEARCH FELLOW AT UNIVERSITY OF WOLLONGONG
We have several Sorensen power supplies in our lab and they are the lowest output noise power supply we have experienced. For any critical research project where output noise and line/load regulations are important, we use only Sorensen power supplies.
TEST LABORATORY MANAGER AT MONASH UNIVERSITY
Our experts are all pre-eminent leaders in electrical products who provide excellent support in their areas of expertise.Technical support
Enquire by email
We promise to respond within 4 business hours (AEST) or you will receive $100 off your next purchase.Enquire now