Established in Germany in 1987, Frankonia is recognised as a highly specialized manufacturer of EMC anechoic chambers and test systems within the automotive and industrial sectors for the testing of electromagnetic compatibility. With their expertise, flexibility, quality and class leading technological innovation (eg. Frankosorb® pyramid absorbers), Frankonia enjoy an enviable reputation for future-proof solutions on a global scale. Frankonia is the preferred supplier for complete turnkey solutions when it comes to the implementation of EMC test facilities, providing the planning, design and coordination of customized solutions with and for their customers that meet today’s and future standards.
Largest installation base in Australia
We bring to you the experience of having installed more EMC chambers in Australia than any other company.
Turn-key solution provider
Fuseco can build a complete end-to-end EMC chamber system with all the test equipment fully integrated or alternatively just the chamber or the test equipment.
With our experience, brands, pricing levels, expertise and industry leading post-installation customer support, Fuseco have become the industry's most trusted partner for EMC testing.
VIC - HEAD OFFICE / WAREHOUSE
27 Viking Court
Cheltenham VIC 3192
NSW - SALES OFFICE / WAREHOUSE
29/8-10 Barry Road
Chipping Norton NSW 2170
QLD - SALES OFFICE
1 / 26 Duke Street
Sunshine Beach QLD 4567
WA - SALES OFFICE
67 Howe Street
Osborne Park WA 6017
EMC means "an electronic or electrical product shall work as intended in its environment. The electronic or electrical product shall not generate electromagnetic disturbances (interference), which may influence other products". In other words, EMC deals with problems of noise emission as well as noise immunity of electronic and electrical products and systems. Electromagnetic disturbances occur as conducted interference as well as radiated emissions and immunity problems.
An anechoic chamber is a room designed to completely absorb reflections of electromagnetic waves used for various EMC Testing. They are also insulated from exterior sources of noise. The combination of both aspects means they simulate a quiet open-space of infinite dimension, which is useful when exterior influences would otherwise give false results. The RF anechoic chamber is typically used to house the equipment for performing measurements of antenna radiation patterns, electromagnetic compatibility (EMC) and radar cross section measurements. EMC chambers allow for the performance of fast and efficient EMC radiated tests at a convenient location, without interference from the ambient electromagnetic environment.
The term conducted emissions refers to the mechanism that enables electromagnetic energy to be created in an electronic device and coupled to its AC power cord. Similarly to radiated emissions, the allowable conducted emissions from electronic devices are controlled by regulatory agencies. If a product passes all radiated emissions regulations but fails a conducted emissions test, the product cannot be legally sold.
The term radiated emissions refers to the unintentional release of electromagnetic energy from an electronic device. The electronic device generates the electromagnetic fields that unintentionally propagate away from the device’s structure. In general, radiated emissions are usually associated with non-intentional radiators, but intentional radiators can also have unwanted emissions at frequencies outside their intended transmission frequency band.
Conducted Immunity (also called Susceptibility) is a measure of the ability of electronic products to tolerate the influence of conducted electrical energy from other electronic products and electromagnetic phenomena.
Radiated Immunity (also called Susceptibility) is a measure of the ability of electronic products to tolerate the influence of radiated electrical energy from other electronic products and electromagnetic phenomena.
Simulates disturbances created by radio transmitters operating below 80 MHz (such as AM broadcast transmitters) that would typically be coupled onto a products interface cables.
The test signal, amplitude modulated by a 1 kHz sine wave, is injected onto the AC or DC wires via a Coupling, Decoupling Network (CDN) while the frequency is varied. Unshielded cables can be tested using either a CDN, coupling clamp or current injection probe. Shielded cables are tested using direct injection, the signal is coupled through a 100-Ohm resistor onto the shield of the cable under test. The injection level is pre-calibrated using the appropriate calibration jig and is equivalent to the open circuit voltage at the output from the amplifier for an unmodulated signal.
The test level for the residential, commercial and light industrial generic standard is 3 Volts; for heavy industrial equipment the test level is 10 Volts.
We have a Frankonia SAC3Plus EMC chamber that we use for commercial testing. We have some height limitations in our laboratory and its dome shaped design fits very conveniently. We are happy with the performance of the chamber and their absorber design is great. No carbon dust and falling of foam absorbers. Previously we had carbon foam-based absorbers and we literally had to wear a safety hat before entering the chamber.
Our experts are all pre-eminent leaders in electrical products who provide excellent support in their areas of expertise.Technical support
Enquire by email
We promise to respond within 4 business hours (AEST) or you will receive $100 off your next purchase.Enquire now