We're here to help

Talk to an expert today.
Our friendly team of highly trained specialists will quickly assist you.

Get a quote technical support 1300 387 326
  • Triple output voltage, all are adjustable
  • Can set to serial/ parallel/ track mode
  • The voltage and current for each channel can be displayed at the same time
  • Small size of 1/2 2U
  • VFD display
  • Function keys with LED light
  • Remote measurement function, compensation
  • online pressure drop
  • High accuracy, high resolution and high stability
  • Limited voltage and over heat protection
  • Intelligent fan control
  • Built-in RS232/USB/GPIB communication interface
  • Low ripple and low noise
  • Can be monitored by computer software
  • Support standard SCPI communication protocol
  • Memory capacity of 36 groups, for save and recall
  • Can adjust the stepping by left/right arrow button
  • Output timer function(0.1~99999.9 seconds)
  • Isolated circuit, support plus and minus reverse

IT6300 triple output power supply can adjust the stepping by left/right arrow button, very convenient for your operation.IT6300B has remote measurement function, it can ensure your testing accurately. And built-in RS232, USB, GPIB interface, and each channel can set to serial/ parallel/ track mode, it can bring multi-purpose testing solution to you.


Track mode
CH1 and CH2, CH2 and CH3, or all three channels to be set as track mode, if any one channel parameter changed, the corresponding parameters of the other channels will also change in direct proportion.
For example, set up voltage and current of CH1 and CH2 to be CH1:4V, 1A; CH2:8V, 2A. Set CH1 and CH2 in track mode, in output off and Meter state, VFD is shown below:



Datasheet 
View product on ITECH website

We're here to help

Talk to an expert today.
Our friendly team of highly trained specialists will quickly assist you.

Get a quote technical support 1300 387 326

We promise to respond within 4 business hours (AEST).

Or you will receive $100 off your next purchase. Read how it works.

Our Experience

We offer you advice that is gained from many years of assisting people from all industries with their individual requirements, technical objectives and challenges.

largest range in australia

With the largest range of programmable power solutions in Australia, we can assist you with a solution to virtually all applications.

most advanced solutions

The Ametek stable of brands the are industry's greatest innovators, always being the first to release new technologies & features.  

Top FAQs

Fuseco's Office and Primary Warehouse are located at: 

Unit 4 / 1-7 Friars Road, 

Moorabbin Vic 3189 

Melbourne, Australia 


Postal Address: 

PO Box 1425 Moorabbin Vic 3189 Melbourne, Australia

We'd love to hear from you! At Fuseco, rather than publish generic prices, we prefer to give you an individual quote. This ensures that we provide you with the best possible pricing to meet your needs.


The quickest way to place an order is to give our customer service team a call or send us an email. We promise to respond within 4 hours or you get $100 off your next order, however we usually respond within 1-2 hours to email enquiries. So go ahead and speak to us, we'd love to help you with your needs.

FUSES

  • $20 + GST
  • FIS (Free Into Store) for all orders over $100, excluding GST & freight (For account customers only)


ALL OTHER PRODUCTS

  • POA (Price On Application)
  • FOT (Customer nominates own carrier and accepts all charges)


Additional fees may apply for remote areas.


Freight details

When purchasing a power supply, the first choice to be made is linear supply or switching supply. Linear power supplies offer low ripple and noise specifications and have fast transient behavior. However they are inefficient and generate a lot of heat. They are also quite heavy. As a result most engineers prefer linear power supplies for low power applications. Using switching power supplies is a better choice for higher output power or multichannel applications. They provide higher power density. Switching power supplies are easier to control than linear supplies and cost about the same per channel.

DC output voltage slew rate is a rise or fall time. DC programmable power supplies have output filters that use large capacitors that store a lot of energy. It’s mainly the charge and discharge time of this filter, combined with the current demand of the DUT, which determine a supply’s voltage slew rate. The voltage slew rate is mostly independent of the connected EUT.

Stability is a measure of a supply’s long term output voltage or current drift. Stability is primarily specified in parts per million or ppm.

If more output current is required then paralleling power supply outputs is generally the solution. Ametek Programmable Power uses a dedicated control bus to connect its power supplies in parallel. The system configures itself automatically, identifying which unit is the master and which units are the slaves.

If more output voltage is required then connecting power supplies outputs in series is generally the solution. All you have to do is to connect the positive terminal of one supply to the negative of another. The limitation is that when operated in series, there are no master and slave units. Individual power supplies has to be programmed.

Upgrading to the Asterion power supply system has given us significant more testing capability and flexibility. It has been a wise investment. Thank you for your advice and support.

Margaret Smith

TEST LABORATORY SENIOR ANALYST AT UNIVERSITY OF NSW

Buying the MX45 California Instruments power source has given us enhanced testing capabilities. We have the SNK option, which is a bidirectional sink option. We are now able to simulate all grid conditions in our lab environment up to 45kVA. For me, reliability is important and I’m happy to say that we have been using this device for many years without any issues.

Keith Boydell

RESEARCH FELLOW AT UNIVERSITY OF WOLLONGONG

We have several Sorensen power supplies in our lab and they are the lowest output noise power supply we have experienced. For any critical research project where output noise and line/load regulations are important, we use only Sorensen power supplies.

Annette Eskdale

TEST LABORATORY MANAGER AT MONASH UNIVERSITY

Technical Support

Our experts are all pre-eminent leaders in electrical products who provide excellent support in their areas of expertise.

Technical support

Talk to an expert

Our friendly team are highly trained product experts who really enjoy helping customers find what they need.

1300 387 326

call 1300 387 326

Enquire by email

We promise to respond within 4 business hours (AEST) or you will receive $100 off your next purchase.

Enquire now